Control virtually every aspect of your MACH based machine from the palm of you hand!
This is not some “game” controller or limited function MPG for just jogging your machine around. The PN200 is a full-featured HAND CONTROL that puts total control of your CNC machine at your finger tips. The PN200 is extremely versatile and tied tightly to MACH (any action on the PN200 shows on the console and screen, and any console action shows on the PN200). You can quickly see the status of critical settings on the front of the PN200 with the multiple status LED’s. Most are two-color LED’s, so several states are easy to display. If you need to see the important objects on the MACH screen (like XYZ DRO’s, Feedrate and override numbers, THC settings/numbers, etc) just click on the PN200 “SCREEN” button and up pops a custom screen on your monitor with huge readouts you can see across the room.
From the PN200 you can move, (4 selectable Jog speeds/ranges) using the Keypad or from the 360 deg Proportional Jog Stick. Ultra slow jog and single step mode lets you get as precise as you need. Switch back and forth with a single button press. You can do all of the pre-cut setup (zero, reference, home, run macros, etc) with ONE FINGER. You can control your CandCNC DTHC plasma control directly from the PN200 including changing Preset Arc Volts (arc gap) while you cut!.
The PN200 is truly a breakthrough in MACH “pendants.” It frees you from running back and forth to the keyboard when you are running the table. Once you load the G-Code to cut into to MACH at the PC, you can do the rest of the Setup and RUN from the PN200. Put a big monitor at the PC and make the system almost totally remote.
THE PN200 IS CURRENTLY NOT COMPATIBLE WITH COMMANDCNC LINUX SYSTEMS. IT IS IN DEVELOPMENT BUT NOT CURRENTLY SUPPORTED.