All the awesome things of the Bladrunner Ethercut Linux with CommandCNC plus a host of new features:
New:external mounted 15 input I/O card makes wiring faster. No opening the case to plugin external sensors (inputs). Note: cannot be used with new FT-02 which has 12 pin connectors and added inputs.
New: 12 pin round connector for direct connection to new FT-02 or Remote Table I/O for single cable between table and controller.
New: Optional Remote Table I/O module makes wiring cleaner and quicker.
<New: Screw type Posi-latch round connectors for motors.
New: Dual Motor Driver Modules with easy 5 min swap and built in signal “sniffer” LED’s. See the signals at the driver modules.
New: Better airflow and module layout makes repair easier.
More troubleshooting indicators on all modules.
Better AC section wiring and built in dual relay module for external AC loads up to 15A
New: Options for relay expansion (up to 4 added)
Same “Smart” power control with sensors and auto-shutdown on faults
New: Direct communication to CommandCNC from power section. Display of parameters while running.
New: Options to Extend warranty and phone support for up to 2 more years over base 2 year.
We have listened to customers and vendors and constantly improved the Control Software and the User Interface. Along the way we listened to suggestions about the control box and concerns that builders have. The G5 is the result of dozens of suggested improvements that make a great product even better. The first thing we did was to move the Table I/O card from the inside of the box to the outside; no more taking the lid off to hookup the home and limit switches or to plug in and wire the Feather Touch sensors. While we were at it we made it have pluggable terminal blocks that let you unplug everything and move it in seconds. We took our expertise with the single cable connection of the Super Z and added a 12 pin round connector that makes a single cable to an external module fast and easy. The new Table I/O Remote module (available option) extends 8 inputs and 4 driven relay outputs to a module that mounts to your table or gantry and with one nice neat cable back to the controller. No more tangles of wires and trying to trace what connects to where. The new Table I/O at the controller has all of the same features as the prior internal ones including LED indicators on all 16 inputs and a source of regulated 12V floating power for external 12V sensors that can be used on any of the inputs. NOTE: The Remote Table I/O CANNOT be used with the FT-02. They both use the same 12 pin connector. It will work with the older FT-01.
Additional information
Weight
80 lbs
Dimensions
22 × 22 × 14 in
What's Included
BladeRunner G5 DTHC V Power Supply Box AIO (White)
(4) 620 Stepper Motors Prewired with 4 pin round connectors
Recovery Memeory Stick (Computer)
Green CAT5 Ethernet Cable
Yellow CAT5 Ethernet Cable
Blue CAT5 Ethernet Cable
Shielded USB cable (to 4 port hub)
PWMIIA Module
4 Port Hub
2 year (24 Month) Warranty and phone support.
Key Features
BladeRunner G5 Fifth Generation 620-4 EtherCut
576W 48V12A ESPII “Smart” Power Supply
Compact size, big features. 13″ X 15″ X 6.25″ (includes DC Motor Power Supply)
Totally Modular Design makes upgrades or repair fast and easy.
Universal Power 100VAC – 240VAC 50/60 hz. Smart Panel
Front Panel Processor Control (for Motor Power Supply) control with auto-shutdown on fault.
Motor Driver Pulse Monitor (signal sniffer) shows actual STEP pulses by flashes and DIR by pulse color.
Front Panel Display of any Fault.
Side Panel Ethernet Single Port Input for attachment to PC.
Lots of I/O: 16 isolated inputs, 6 axis of motion, 2 built in Aux AC outlets and up to 4 added external relays or SSR’s
Unit can be configured from 2 to 6 axis of drives IN THE FIELD. Quik plug technology.
Intense monitoring of power, load and temperature protects the motor drives. Displayed in the user screens.
Real time display of actual conditions in the CommandCNC Operator Screen (plug-in provided)
Multiple stored configurations for Plasma, Router and Oxy-Fuel and each type can have multiple response “profiles” You can have icon selectiosn of different kindsof cutting with each type of Config . Choose between SLow, Medium and Fast response in Plamsa to cut a wide range of material and even complex stuff like corrugated!
Motor cables attach via screw on type posi-lock connectors. No crimping, no soldering.
Unit can be expanded to support other options. External option modules make wiring fast and clean
Isolated Digital Torch Height (DTHC5) 5th generation high speed expansion module
Driver Cards change out in minutes. new Dual Axis modules ave 4 screws and two cables.
Microstepping, anti-resonance, GECKO G251 drives are latest technology.
Plenty of heatsink for cool operation. Internal Fan. Forced Air Coooling with filter.
All-In-One (AIO) design.
ESPIII protects and monitors expensive electronics.
On Screen readout of power supply parameters (Volts, Amps, Temperature).
Dual Switched AC Outlet is ready for aux loads up to 15A AC or DC. Build and control scribers, punches, etc.
4ea 620 oz-in 3.5A Hybrid Stepper motors optimized for the BladeRunner.
THC Sensor PWMIIA module & 25ft cable.
Easy to fing CAT5 modular cables
Built for relighability
Custom screens for for each type of cutting
Auto Corner Slowdown and high tolerance tracking
High Speed VAD locks DTHC off when Xy slows down for any reason preventing head dive on corners anf d turns
2 YEAR Base Warranty on all internal components INCLUDING the GECKO motor drives.
Extended warranty avaiailable up to 2 additional years and continued phone suppor
High Automation Feature allows auto setup for plasma cuts from the CUT FILE (G-CODE).
RS485 to Hypetherm OPTION brings unique features like “Soft Start ” (increases consumable life) and “Plasma Peck ” for drill marking (non-pentrating)
G5 Bladerunner Details
Inside look: Modular Design
Then there is the outside!
Top End Exhaust fan
Unique Dual. Driver Modules
.Swap out modules in minutes. Upgrade and add 2 more axis….in minutes 4 screws, 2 cables….done
NEW! BladeRunner G5 620-4
$2,999.00
All the awesome things of the Bladrunner Ethercut Linux with CommandCNC plus a host of new features:
Description
Well, its ABOUT TIME! (the Crowd chants)
We have listened to customers and vendors and constantly improved the Control Software and the User Interface. Along the way we listened to suggestions about the control box and concerns that builders have. The G5 is the result of dozens of suggested improvements that make a great product even better. The first thing we did was to move the Table I/O card from the inside of the box to the outside; no more taking the lid off to hookup the home and limit switches or to plug in and wire the Feather Touch sensors. While we were at it we made it have pluggable terminal blocks that let you unplug everything and move it in seconds. We took our expertise with the single cable connection of the Super Z and added a 12 pin round connector that makes a single cable to an external module fast and easy. The new Table I/O Remote module (available option) extends 8 inputs and 4 driven relay outputs to a module that mounts to your table or gantry and with one nice neat cable back to the controller. No more tangles of wires and trying to trace what connects to where. The new Table I/O at the controller has all of the same features as the prior internal ones including LED indicators on all 16 inputs and a source of regulated 12V floating power for external 12V sensors that can be used on any of the inputs. NOTE: The Remote Table I/O CANNOT be used with the FT-02. They both use the same 12 pin connector. It will work with the older FT-01.
Additional information
BladeRunner G5 DTHC V Power Supply Box AIO (White)
(4) 620 Stepper Motors Prewired with 4 pin round connectors
Recovery Memeory Stick (Computer)
Green CAT5 Ethernet Cable
Yellow CAT5 Ethernet Cable
Blue CAT5 Ethernet Cable
Shielded USB cable (to 4 port hub)
PWMIIA Module
4 Port Hub
2 year (24 Month) Warranty and phone support.
Key Features
BladeRunner G5 Fifth Generation
620-4 EtherCut
G5 Bladerunner Details
Inside look: Modular Design
Then there is the outside!
Top End Exhaust fan
Unique Dual. Driver Modules
.Swap out modules in minutes. Upgrade and add 2 more axis….in minutes 4 screws, 2 cables….done