BladeRunner G5 3 Motor Combo (Router/Mill applications)
$2,270.00
BladeRunner G5 3 motor Combo is a 3 Axis XYZ controller with 23 frame 620 motors and cables.
A good solid router/mill 3 motor control for small to medium sized applications .
Add more motors and axis drivers . Up to 5 motors .
Upgrade to a true 3Phase Spindle and VFD and use our NO_STALL Spindle Speed module. Uses the RS485 on the VFD for total control
Avoid ruined pieces from the bit stalling in the cut . ISS-05 reads motor load/torque and scales back feedrates automatically then recovers
Tired of having to cut a job with separate cut files for each tool? Add our Low Profile Tool Setter and the spindle stops, moves to a tool change position and then touches off to reset the tool length and continues the cut.
New 2020 upgraded design with more inputs (16) more axis count (ip to 6) , Easier to setup , easier to use . Comes with POST processors for SheetCAM (2D and 2.5D) and Vcarve Pro and Aspire CAM packages (not included ) External Table I/O means no opening the case to do wiring and its got the convenient 12 pin connector to use the OPTIONAL Remote Table I/O
The BladeRunner G5 3 Motor Combo is designed for routing so no DTHC technology is included. Three (3) 620 oz-in 3.5A 23 frame Hybrid Stepper motors optimized for the BladeRunner are shipped with this system and it connects to the PC with a single Ethernet cable for fast and easy connectivity and communication. Geared properly, the 620 motors can give you adequate torque to handle a full sized 2hp to 3 ho rated Router or the 2.2KW rated VFD/Spindle combos . Paired with our commercial level “No-Stall” ISS-05 Spindle Speed add-on and using a good design software like Vectric Vcarve or Aspire (Post processors included) you have all you need to build a professional but cost effective 2.5D or 3D type router. How about a semi-automated tool changer to save you time and mistakes when doing jobs that require more than one tool? CandCNC has been number one in plasma for years and we bring the same level of experience to the routing market.
Add more motors and other options to make you r G5 Router control more versatile..
BladeRunner G5 3 Motor Combo (Router/Mill applications)
$2,270.00
BladeRunner G5 3 motor Combo is a 3 Axis XYZ controller with 23 frame 620 motors and cables.
Description
New 2020 upgraded design with more inputs (16) more axis count (ip to 6) , Easier to setup , easier to use . Comes with POST processors for SheetCAM (2D and 2.5D) and Vcarve Pro and Aspire CAM packages (not included ) External Table I/O means no opening the case to do wiring and its got the convenient 12 pin connector to use the OPTIONAL Remote Table I/O
The BladeRunner G5 3 Motor Combo is designed for routing so no DTHC technology is included. Three (3) 620 oz-in 3.5A 23 frame Hybrid Stepper motors optimized for the BladeRunner are shipped with this system and it connects to the PC with a single Ethernet cable for fast and easy connectivity and communication. Geared properly, the 620 motors can give you adequate torque to handle a full sized 2hp to 3 ho rated Router or the 2.2KW rated VFD/Spindle combos . Paired with our commercial level “No-Stall” ISS-05 Spindle Speed add-on and using a good design software like Vectric Vcarve or Aspire (Post processors included) you have all you need to build a professional but cost effective 2.5D or 3D type router. How about a semi-automated tool changer to save you time and mistakes when doing jobs that require more than one tool? CandCNC has been number one in plasma for years and we bring the same level of experience to the routing market.
Add more motors and other options to make you r G5 Router control more versatile..
Additional information
BladeRunnerPower Supply Box (White)
(3) 300 Stepper Motors
Installation CD
CAT5 Ethernet Cable
Key Features
BladeRunner 3 Combo