The Plasma Cutter Basics Bundle

  • MACH3  needed for PC to Machine interface control (REQUIRED with all CandCNC Plug-n-RUN Systems)
  • SheetCAM TNG.  The best CAM choice for plasma and other 2D cutting. 
  • Inkscape* Free vector editing and drawing program
  • POSTS for CandCNC hardware with SheetCAM and MACH
  • Custom MACH profiles and Screens
  • Sample Clipart (CDR format opens with CorelDraw or Inkscape)

The three basic packages you need to draw, toolpath (generate g-code) and cut with plasma.  CAM Software handles mixed processes (plasma, routing, scribing, drilling, engraving) Special POST files for plasma, router and special functions for MACH3 and our hardware packages are included

SheetCAM TNG gives you features like:

  • auto or manual lead-ins/outs, kerf offset,
  • defined pierce height and inital cut height,
  • auto touch-off for IHS. 
  • It's flexible POST languge allows easy setups for special funcions like scribing (with a separate tool), rotarty plasma cutting (with our Rotary Wizard).

* NOTE InkScape is a FREE application for importing, editing, tracing bitmaps and vector drawing.  We have used it with SheetCAM TNG and MACH to do plasma cutting.  If you already own a pure CAD program or want to cut basic geometric shapes then use your package or any of a dozen CAD drawing packages and export in DXF to SheetCAM for processing and g-code generation.  Inkscape is distributed under the GNU software license terms.

NOTE:  MACH and SheetCAM demo programs are included on the Bundle support CD's . The above bundles are for LICENSES to make the software a full unlimited version.  Licenses are on the Support CD if ordered with your system.  Bundles oredred after a system willhave licesens sent vai e-amil .   Other programs and samples may be included.

 

 

Basic 2D Plasma Cutter Software Bundle
$320.00 you save
$30.00

 

   

SOFTWARE BUNDLES ONLY AVAILABLE WITH Plug-N-Run or MP3000 Series systems  from CandCNC

 

Pro Shop Plasma Cutters Bundle
$667.50 you save $67.50

 

The Pro Shop Plasma Cutters Bundle.
For the cutting of flat and round metal using plasma.

  • MACH3  needed for PC to Machine interface control (REQUIRED with all CandCNC Plug-n-RUN Systems)
  • Inkscape* Free vector editing and drawing program
  • SheetCAM TNG.  The best CAM choice for plasma and other 2D cutting. 
  • Pipe Wizard with PIPEFIT™ for rotary pipe cutting
  • POSTS for CandCNC hardware with SheetCAM and MACH including  for rotary pipe cutting
  • Expanded Sample Clipart (CDR format opens with CorelDraw or Inkscape)

This package DOES NOT include CorelDraw.  You can find older versions (anything back to REV12 works fine) on EBAY and from web resellers at a fraction of the current version price.  CorelDraw has advanced features over Inkscape in certain aspects.  Pipe Wizard is custom screens, POSTS and tutorial files plus PipeFit™ as a special plug-in for SheetCAM. PipeFit™allows a user,  though simple input  boxes,  to design simple or complex multi joint pipe cuts to do saddle cuts, copes, miters, 'Y' joints and end caps. 

NOTE:  MACH3 ,SheetCAM and Pipe Wizard demo packages are included on the standard  support CD's . The above bundles are for LICENSES to make the software a full unlimited version.  MACH and SheetCAM Licenses are sent on the Support CD when purchased with a product  . Bundles purchsed separtely will be handled thoruhg email for licenses.  

All content copyright CadnCNC 2014.  All rights reserved.SOFTWARE BUNDLES ONLY AVAILABLE WITH Plug-N-Run or MP3000 Series systems from CandCNC