MP1000C Basic

Introducing the best PC to machine interface.  The MP1000C-Basic is all of the input/output circuitry of the popular MP1000C-THC and MP1000C-SpS products but with a simplified front panel.  You still have our unique Step & Direction Front Panel Monitor and the three primary switches that can be used as MACH3 inputs or as the control switches/indicators for our companion AC and DC control modules or the SPSC650/SPSC1500 units. You still get the Table I/O card (HCL301) and MTA100 card to give you full finctionality.  The HCL301 moves the connection points for the Home and Limt switches out to the table or inside the power controller where they belong and makes the process of wiring easier and more reliable.  In addition you can upgrade the HCL301 with our NEW Quad Relay Box).   Review the features list and then check our Specials section for combo pricing.  The MP1000-Basic is the perfect plug-n-go solution for routers and milling machines.  .

FEATURES:

 

  • 5 full axis of buffered outputs for use with all step and direction input motor drivers.  50ma Line driver chips for driving opto input motor drivers (i.e. Gecko).
  • Two Full Ports of I/O.   Uses 2nd add-in Parallel Port Card (sold separately or in the Bundles and Package Deals)
  • Remote breakout card for motor drivers (MTA100)
  • Plug compatable with CandCNC SPSC650 and SPSC1500 power control modules. 
  • Configurable front panel switches for use with mapped functions to MACH3 or for PSC 650/1500 remote control
  • Front panel input jack for the Pendant-Handwheel option. NEW!  Works with MPG101B 28 Function Hand Controller
  • Unique multifunction Table I/O card for Homes and Limits.  3 relay outputs.  Mounts on table and connects via a single DB25 cable.  Table accessable Feedhold and Emergency Power Off on Table I/O card.
  • All rear panel connections to the MP1000 are standard shielded DB25 or DB9 cables available anywhere.
  • Clear concise manuals
  • Unparalleled support
  • Front panel Charge Pump indicator for use with MACH2/3 CP feature.
  • 3 Axis Step & Dir activity indicator divides the steps so you can see your outputs working
  • Compact unit apprx 10 X 7 X 3 1/2 fits close to your PC for finger-tip control
  • Perfect control box for Router and Milling operations.  Get your logic control out of the heat and noise of the Motor/Driver box!
  • Used in our Router Pak Package Deals.

The perfect edtion to the MP1000 line of multi-purpose interface/comtroller boxes.  The MP1000-Basic is the little brother to the heavy hitter THC and SPS models. You get all of the advanced features like front panel mapped functions (MACH3) and the  plug-in for the MPG-101 (see website for more details).  Easy to install, easy to use.  If you are looking to buy a product that is well engineered and upgradable then the MP1000-Basic is the answer.

MP1000-Basic                                   $369.00

OPTIONS:
Bottom of page

QUAD RELAY BOX OPTION

MPG101B Hand Controller OPTION

All Content Copyright CandCNC 2005-2007 All rights reserved

CandCNC  903-364-2740   North Texas

OPTIONS

NEW!  Enclosed QUAD RELAY BOX with 2 AC Recp (one 15A; one 10A) and two side access AUX Relays.  12VDC for driving low current loads with the AUX relays (e.g. SSR's). Mount close to controller or up to 25ft away.  Easy mount tabs.  Fully Assembled and tested.  Works only with our HCL301 I/O Card (part of MP1000C package)  Shipped with 25' DB 9 cable.  AC cord for AC power is 6ft heavy duty 14/3.   NOT INTENDED FOR USE WITH 230VAC loads or sources.

$63.00


Complete Cable Set (DB25's DB9's for MP1000C and default cards. For PC interface.  Included in COMBO Deal.  All cables 15'

$31.00

 

MPG-101B  Hand Controller with Dual 4 Quadrant Proportional Jog Stick(plugs into front panel)

$149.00 (with MP1000C Purchase) 
 

:

SAVE $20.00 off MPG101B Price:  Order it with the MP1000C-Basic Unit

Option pricing is based on being part of the original order.Contact factory for pricing of options for shipped units 

Terms:  Paid in full prior to shipping.

Contents of this document contain copyrighted photos.  No unauthorized use or reproduction is allowed
without permission of the author.

All content copyrighted 2007-2008  by CandCNC.  All rights reserved

Return to Main Page